December 7, 2021

Refining the 2-In-1 Step Method for Kintsugi Ceramic Repair

        Last time I gave y’all a thorough review of 6 different kintsugi methods you can choose from based on the needs of your pot-mending situation. After completing this review, out of respect for my current situation as a graduate student with limited time and funds, I opted to try one of the simplest methods - the "2-in-1 Step Method: Oozing Colored Epoxy". As I previously described, this method requires the least supplies, hands-on steps, and wait time while providing a durable end product. Because this method had concerns regarding control of the aesthetic quality, my next question was whether these limitations could be improved upon. Hence, today's article covers several trial pots I repaired with this method to observe and tweak the 2-in-1 Step technique. My results from the final pot I repaired (see below) advance the 2-in-1 Step Method as it demonstrates the ability to use this method to cleanly fill large missing pieces in some circumstances, which has not previously been reported. Combined with the careful application of the colored epoxy, this technique may now be closer to the quality associated with the more complicated kintsugi repair techniques.

        My recommendations for an improved 2-in-1 Step protocol can be found at the end of this article.
    The result of my final kintsugi repair using the 2-in-1 Step Method: Oozing Colored Epoxy.
    This piece had a large missing piece and some small gaps from smaller missing pieces which made it extra challenging for this technique.
    2 comments: